Schematic Creation and Analysis

This example shows how you can use PyAEDT to create a Circuit design and run a Nexxim time-domain simulation.

# sphinx_gallery_thumbnail_path = 'Resources/circuit.png'

from pyaedt import Circuit
from pyaedt import Desktop
import os

Launch AEDT and Circuit

This examples launches AEDT 2021.2 in graphical mode.

# This examples uses SI units.

desktop_version = "2021.2"

Launch AEDT in Non-Graphical Mode

You can change the Boolean parameter non_graphical to False to launch AEDT in graphical mode. You can change the Boolean parameter new_thread to False to launch AEDT in existing Desktop Session, if any.

non_graphical = False
new_thread = True

Launch AEDT and Circuit

The pyaedt.Desktop class initializes AEDT and starts it on a specified version in a specified graphical mode. The Boolean parameter new_thread defines whether to create a new instance of AEDT or try to connect to existing instance of it.

desktop = Desktop(desktop_version, non_graphical, new_thread)
aedt_app = Circuit()


Launching PyAEDT outside Electronics Desktop with CPython and Pythonnet
Launching AEDT installation C:\Program Files\AnsysEM\AnsysEM21.2\Win64
pyaedt info: Launching AEDT with module Pythonnet.
pyaedt info: Ansoft.ElectronicsDesktop.2021.2 Started with process ID 4256.
pyaedt info: Logger Started on C:\Users\ansys\Documents\Ansoft\pyaedt20220120_154317.log
pyaedt info: pyaedt v0.5.dev1
pyaedt info: Python version 3.8.10 (tags/v3.8.10:3d8993a, May  3 2021, 11:48:03) [MSC v.1928 64 bit (AMD64)]
pyaedt info: Project Project2596 has been created.
pyaedt info: No design is present. Inserting a new design.
pyaedt info: Design Loaded
pyaedt info: Successfully loaded project materials !
pyaedt info: Materials Loaded

Create a Circuit Setup

This method creates and customizes a Linear Network Analysis (LNA) setup.

setup1 = aedt_app.create_setup("MyLNA")
setup1.SweepDefinition = [
    ("Variable", "Freq"),
    ("Data", "LINC 0GHz 4GHz 10001"),
    ("OffsetF1", False),
    ("Synchronize", 0),



Create Components

These methods create components, such as inductors, resistors, and capacitors.

inductor = aedt_app.modeler.schematic.create_inductor("L1", 1e-9, [0, 0])
resistor = aedt_app.modeler.schematic.create_resistor("R1", 50, [0.0254, 0])
capacitor = aedt_app.modeler.schematic.create_capacitor("C1", 1e-12)

Get Component Pins

This method gets all pins of a specified component.

pins_resistor = resistor.pins

Create a Port and a Ground

These methods create a port and a ground, which are needed for a circuit anlaysis.

port = aedt_app.modeler.components.create_interface_port("myport")
gnd = aedt_app.modeler.components.create_gnd()

Connect Components

This method connects components with wires.




Add a Transient Setup

This method adds a transient setup.

setup2 = aedt_app.create_setup("MyTransient", aedt_app.SETUPS.NexximTransient)
setup2.TransientData = ["0.01ns", "200ns"]
setup3 = aedt_app.create_setup("MyDC", aedt_app.SETUPS.NexximDC)

Solve the Transient Setup

This method solves the transient setup.




pyaedt info: Solving design setup MyLNA
pyaedt info: Design setup MyLNA solved correctly
pyaedt info: FullWaveSpice correctly exported to C:\Users\ansys\Documents\Ansoft\Project2596.pyaedt\Circuit Design_4NE\Circuit Design_4NE.sp

'C:\\Users\\ansys\\Documents\\Ansoft\\Project2596.pyaedt\\Circuit Design_4NE\\Circuit Design_4NE.sp'

Close AEDT

After the simulaton is completed, you can close AEDT or release it using the pyaedt.Desktop.force_close_desktop() method. All methods provide for saving the project before exiting.

if != "posix":

Total running time of the script: ( 0 minutes 34.299 seconds)

Gallery generated by Sphinx-Gallery