create_sbr_pulse_doppler_setup

Hfss.create_sbr_pulse_doppler_setup(time_var=None, sweep_time_duration=0, center_freq=76.5, resolution=1, period=200, velocity_resolution=0.4, min_velocity=- 20, max_velocity=20, ray_density_per_wavelenght=0.2, max_bounces=5, setup_name=None)[source]

Create an SBR+ pulse doppler setup.

Parameters
time_varstr, optional

Name of the time variable. The default is None, in which case the first time variable available is used.

sweep_time_durationfloat, optional

Sweep time duration. If greater than 0, a parametric sweep is created. The default is 0.

center_freqfloat, optional

Center frequency in GHz. The default is 76.5.

resolutionfloat, optional

Doppler resolution in meters. The default is 1.

periodfloat, optional

Period of analysis in meters. The default is 200.

velocity_resolutionfloat, optional

Doppler velocity resolution in meters per second. The default is 0.4.

min_velocitystr, optional

Minimum doppler velocity in meters per second. The default is -20.

max_velocitystr, optional

Maximum doppler velocity in meters per second. The default is 20.

ray_density_per_wavelenghtfloat, optional

Doppler ray density per wavelength. The default is 0.2.

max_bouncesint, optional

Maximum number of bBounces. The default is 5.

setup_namestr, optional

Name of the setup. The default is None.

Returns
(pyaedt.modules.SolveSetup.Setup,

pyaedt.modules.DesignXPloration.ParametericsSetups.Optimetrics)

References

>>> oModule.InsertSetup